Epson 7880 User's Guide - Page 158
Preparing the Printer for Shipment, You can choose whether to remove the ink cartridges or leave them
UPC - 010343866874
View all Epson 7880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
158 | Maintaining and Transporting the Printer Note: It's a good idea to store partially used cartridges in separate, resealable plastic bags. Preparing the Printer for Shipment 1. Turn off the printer and wait until the carriage moves to the home position (on the far right) and the P Power light goes off. Then unplug the printer. 2. Remove the following parts: • Power cord and interface cables • Paper basket • Roll paper spindle • All paper or other media • Optional auto take-up reel (if installed) • Optional manual cutter (if installed) 3. Raise the ink levers. You can choose whether to remove the ink cartridges or leave them installed. However, you must keep the ink levers raised when transporting the printer to prevent ink from leaking. 4. Reinstall the carriage locking bracket and screw that were removed during setup, as shown below. Tip: For more secure transportation, tape all doors and covers shut. 158