Epson ActionNote 866 User Manual - Page 89

Gently pull the processor chip straight up and set it aside.

Get Epson ActionNote 866 PDF manuals and user guides View all Epson ActionNote 866 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 89 highlights

Caution Make sure you ground yourself before you touch the processor chip. Then remain as stationary as possible while you install it. Do not touch the pins on the processor chip. Handle the microprocessor only by the edges of its case. 3. Position the chip puller between the processor chip and the socket. 4. Gently pull the processor chip straight up and set it aside. 5. Remove the new chip from its package and inspect the pins. If they are bent, do not install the chip. Contact your vendor for a new microprocessor. 6. Position the processor chip over the socket, aligning the notched or marked corner of the chip with the pin 1 hole on the socket. pin 1 4-20 Installing Optional Devices

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
Caution
Make sure you ground yourself before you touch the
processor chip. Then remain as stationary as possible
while you install it. Do not touch the pins on the
processor chip. Handle the microprocessor only by the
edges of its case.
3.
Position the chip puller between the processor chip and the
socket.
4.
Gently pull the processor chip straight up and set it aside.
5.
Remove the new chip from its package and inspect the pins.
If they are bent, do not install the chip. Contact your
vendor for a new microprocessor.
6.
Position the processor chip over the socket, aligning the
notched or marked corner of the chip with the pin 1 hole on
the socket.
pin 1
4-20
Installing Optional Devices