Epson ActionNote 866 User Manual - Page 93
Installing the Fax/Modem, Remove the plastic insert covering the fax/ modem port
View all Epson ActionNote 866 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
5. If you are finished installing internal components, replace the keyboard as described on pages 4-15 to 4-16. 6. Run the Setup program, as described in Chapter 1, to update your computer's configuration with the new microprocessor. Installing the Fax/Modem If your computer did not come with the internal fax/ modem, you can install it yourself. See the Introduction for information about obtaining optional accessories for your ActionNote computer. Follow these steps to install the fax/ modem: 1. Remove the keyboard as described on pages 4-13 to 4-15 2. Refer to the illustration on page 4-25 to locate the fax/ modem connector next to the power converter on the system board. 3. Remove the plastic insert covering the fax/ modem port opening on the left side of the computer, next to the PC card slots. Insert the tip of a screwdriver through the slot in the plastic cover and carefully pry the cover off. You may need to use gently increasing presure to break the cover away from the case and push it out. 4-24 Installing Optional Devices