Epson ActionNote 910C User Manual - Page 78
A PC Card Isn’t Working
View all Epson ActionNote 910C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Make sure the Hard Disk option is set correctly in Setup. If your hard disk drive is not detected, you will have to configure the appropriate hard disk drive parameters yourself. If you replaced or upgraded the hard disk drive, make sure it is installed correctly and that the operating system is installed. See "Upgrading the Hard Disk Drive" in Chapter 5. A PC Card Isn't Working The PC card slots on your computer support PCMCIA version 2.1 or earlier and accept up to two Type I or II cards, or one Type III card. If you aren't sure your card is compatible, call the EPSON Connection or your Authorized EPSON Servicer for the latest information about tested cards. Like a diskette, a new PC RAM or hard disk card may need to be formatted (initialized) before you can use it. See the documentation that came with your card or driver for instructions. Press the release button to remove the card; then try inserting it again. Listen for the beep tone indicating that the card has 7-12 Troubleshooting