Epson ActionTower 8100 User Manual - Page 98
Removing the Drive Mounting Bracket, Installing and Removing Drives in the Slim line Computer
![]() |
View all Epson ActionTower 8100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Removing the Drive Mounting Bracket Your computer has a 3.5-inch diskette drive and a hard disk drive installed in a mounting bracket. In order to install or remove any drives, you must first remove the drive mounting bracket. Follow these steps: 1. Remove the two cables from the diskette drive, as shown below. Grasp the connectors and pull them straight out so you do not bend the pins; do not pull on the cables. 2. Remove the two cables from the hard disk drive. 5-4 Installing and Removing Drives in the Slim line Computer
![](/manual_guide/products/epson-actiontower-8000-user-manual-716f320/98.png)
Removing the Drive Mounting Bracket
Your computer has a 3.5-inch diskette drive and a hard disk
drive installed in a mounting bracket. In order to install or
remove any drives, you must first remove the drive mounting
bracket. Follow these steps:
1.
Remove the two cables from the diskette drive, as shown
below. Grasp the connectors and pull them straight out so
you do not bend the pins; do not pull on the cables.
2.
Remove the two cables from the hard disk drive.
5-4
Installing and Removing Drives in the Slim line Computer