Epson ActionTower 8400 User Manual - Page 120
Installing a Drive in the Front Infernal Drive Bay, Installing the Infernal Drive
![]() |
View all Epson ActionTower 8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Installing a Drive in the Front Internal Drive Bay You can install a half-height, 3.5-inch drive in the front internal drive bay. Installing the Internal Drive Follow these steps to install a drive in the front internal drive bay: 1. Position the drive so its drive and power connectors face the back of the computer and its circuit board is on the bottom. 2. Slide the drive into the front internal drive bay as shown below. Align the holes in both sides of the drive with the slots in the drive bay. Then secure the drive to the bay with the four screws that came with it. Installing and Removing Drives in the Tower Computer 6-5
![](/manual_guide/products/epson-actiontower-8000-user-manual-716f320/120.png)
Installing a Drive in the Front Internal Drive Bay
You can install a half-height, 3.5-inch drive in the front internal
drive bay.
Installing the Internal Drive
Follow these steps to install a drive in the front internal drive
bay:
1.
Position the drive so its drive and power connectors face the
back of the computer and its circuit board is on the bottom.
2.
Slide the drive into the front internal drive bay as shown
below. Align the holes in both sides of the drive with the
slots in the drive bay. Then secure the drive to the bay with
the four screws that came with it.
Installing and Removing Drives in the Tower Computer
6-5