Epson ActionTower 8400 User Manual - Page 80
Installing an Option Cara, slot number you use for each card.
View all Epson ActionTower 8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
6. Replace any option cards you removed; see "Installing an Option Card" for instructions. 7. Replace the computer's cover as described under "Replacing the Cover." Then see "Post-installation Procedures" for instructions on configuring your computer with your new memory size. Installing an Option Card This section explains how to install option cards in your computer. Your computer has five slots; the three large slots are ISA compatible and the two smaller slots are PCI campatible. Note The two PCI slots are labelled PCI1 and PCI2 on the option slot connector card. The SETUP program uses the PCI slot number as it configures the PCI cards, so make a note of the slot number you use for each card. The slot nearest the main system board accommodates only a half-length card. In the slim line computer, the two slots facing the power supply can contain only half-length cards. Caution Before you install any option cards in your system, make sure that each card does not draw more current than the limits listed in the Appendix. 4-16 Installing and Removing Options