Epson ActionTower 8400 User Manual - Page 137
for instructions. Then see Running SETUP
View all Epson ActionTower 8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
6. If there is a drive installed in the rear internal bracket, follow steps 6 through 8 under "Installing a Drive in the Rear Internal Bracket" to reconnect the drive and power cables to the drive. 7. If you have finished installing or removing drives, replace the computer's cover; see "Replacing the Cover" in Chapter 4 for instructions. Then see "Running SETUP" in Chapter 2 for instructions on defining your new drive configuration. 6-22 Installing and Removing Drives in the Tower Computer
6.
If there is a drive installed in the rear internal bracket, follow
steps 6 through 8 under “Installing a Drive in the Rear
Internal Bracket” to reconnect the drive and power cables
to the drive.
7.
If you have finished installing or removing drives, replace
the computer’s cover; see “Replacing the Cover” in
Chapter 4 for instructions. Then see “Running SETUP” in
Chapter 2 for instructions on defining your new drive
configuration.
6-22
Installing and Removing Drives in the Tower Computer