Epson ActionTower 8400 User Manual - Page 92
Gently lift the processor straight up and set it aside.
![]() |
View all Epson ActionTower 8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Caution Make sure you ground yourself by touching the metal surface on the inside of the computer's back panel before you touch the processor. Then remain as stationary as possible while you install it. Do not touch the pins on the processor; handle it only by the edges. 2. If there are any option cards in your way, remove them; see "Removing an Option Card" for instructions. 3. To open the socket, locate the handle at the base of the socket. (The handle rests under a plastic tab.) Press the handle down and away from the tab; then lift it up to release the processor from the socket. The illustration in step 6 shows this handle in the released position. 4. Gently lift the processor straight up and set it aside. 5. Remove the new processor from its package and inspect the pins. If they are bent, do not install the processor; contact your vendor for a new one. (Store the old processor in the packaging included with your new processor, in case you need to reinstall it later.) 4-28 Installing and Removing Options
![](/manual_guide/products/epson-actiontower-8000-user-manual-716f320/92.png)