Epson ActionTower 8400 User Manual - Page 69
Replacing the Cover
View all Epson ActionTower 8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
7. Set the cover aside 8. Ground yourself to the computer by touching the metal surface of the back panel. WARNING Be sure to ground yourself by touching the back panel of the computer every time you remove the cover. If you are not properly grounded, you could generate an electric shock that could damage a component when you touch it. Replacing the Cover When you are ready to replace the computer's cover, refer to the illustrations above and follow these steps: 1. Make sure all the internal components are installed properly. 2. Check all cable connections, especially those that might have been loosened during your work. 3. Make sure all cables are out of the way so they do not catch on the cover. 4. For the slim line computer, insert the lip at the front of the cover between the front bezel and the computer case; then guide the cover straight down. For the tower computer, squeeze the sides in and slide the cover forward until the lip at the front of the cover slides between the front bezel and the computer case. 5. Replace the retaining screws. Installing and Removing Options 4-5