Epson ActionTower 8400 User Manual - Page 81
Installing a Card in the Slimline Computer (3-slot Side)
View all Epson ActionTower 8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
As you install option cards, keep these guidelines in mind: If you have an S-bit ISA card, you can install it in a 16-bit ISA slot, as long as it fits. Install PCI cards only in PCI slots. Note the slot number printed on the option card connector board beside the slots you use. Check the components on your card and the system board before deciding which slot to use. Make sure that no component touches or obstructs other cards or cables. When you unpack the option card, do not touch the components on the circuit board or the gold-edged connectors. Place the card gently on top of its original packing material with the component side facing up. Keep the packing materials in case you remove it later. Adjust any switches or jumpers on the card, if necessary, before you install it. (See the option card instructions.) If you install a video adapter on an option card you need to change the setting of jumper JP2 on the system board to disable the built-in VGA controller; see "Changing the Jumper Settings" for instructions. Installing a Card in the Slimline Computer (3-slot Side) The option card connector board in the slim line computer has two slots on one side and three slots on the other. Although the illustration shows an ISA card, you can use the same instructions to install a PCI card. Installing and Removing Options 4-17