Epson ActionTower 8400 User Manual - Page 38
Integrated Peripherals, options are described in, the table below.
View all Epson ActionTower 8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
The Integrated Peripherals options are described in the table below. Integrated peripherals options Option Settings COM 1 COM 2 3F8, IRQ 4 * (COM1) 2F8, IRQ 3 * (COM2) 338, IRQ 4 238, IRQ 3 3E8, IRQ 4 2E8, IRQ 3 2E8, IRQ 4 2E0, IRQ 3 220, IRQ 4 228, IRQ 3 Auto Disabled LPT port 378, IRQ 7 * 278, IRQ 7 3BC, IRQ 5 378, IRQ 5 278, IRQ 5 3BC, IRQ7 Auto Disabled LPT Mode Description Assign the address for the built-in primary and secondary serial ports: the Auto setting detects any optional ports you may have installed and sets the built-in ports automatically based on the optional port settings to avoid conflicts (if no optional ports are installed, Auto sets the built-in ports to their default settings): the Disabled setting disables the port(s) Assigns the address for the built-in parallel port: the Auto setting detects any optional ports you may have installed and sets the built-in port automatically based on the optional port settings to avoid conflicts (if no optional ports are installed, Auto sets the built-in port to the default setting): select Disabled to disable the port Sets the parallel port mode to: Diskette controller CMD Enhance Mode 3 Standard Bi-Directional* ECP Enabled * Disabled Enabled * Disabled Unidirectional AT mode Bidirectional PS/2 mode Extended Capabilities Port mode Enables or disables the built-in diskette drive controller Enables or disables the CMD driver that automatically checks your drive's IDE modes * Default setting Running SETUP and Installing Drivers 2-9