Epson ActionTower 8400 User Manual - Page 125
Installing a Drive in an External Bay, You need to reinstall the faceplate in later steps if you are
View all Epson ActionTower 8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Installing a Drive in an External Bay Follow these steps to install an internal or externally accessible drive in an externally accessible drive bay: 1. Using a screwdriver, reach inside the back of the drive bay you are going to use and insert the screwdriver into one of the holes in the metal plate covering the drive bay slot. Use the screwdriver to bend the plate up and down until it loosens; then grasp the plate with your hands and pull it out of the drive bay. Discard the plate; you do not need to reinstall it. 2. Remove the plastic faceplate from the bay by pushing it out from the inside of the computer. You need to reinstall the faceplate in later steps if you are installing a hard disk drive. If you are installing an externally accessible drive, keep the faceplate in a safe place in case you remove a drive later. 3. Position the drive so its drive and power connectors face the back of the computer. 6-10 Installing and Removing Drives in the Tower Computer