Epson ActionTower 8400 User Manual - Page 79
Removing SlMMs, away the tabs that secure the SIMM at each end. The SIMM
View all Epson ActionTower 8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Removing SlMMs If you need to remove SIMMs from your computer (to install different ones, for example), follow the steps below: 1. Use the illustration under "Locating the System Board Components" to locate the SIMM sockets on the left side of the main system board, next to the processor. 2. Remove any option cards that may be blocking your access to the SIMM sockets; see "Removing an Option Card" for instructions. 3. Use your fingers or a small screwdriver to carefully pull away the tabs that secure the SIMM at each end. The SIMM falls to the side: remove it from the socket. 4. Follow the same procedure to remove any other SIMMs. 5. If you are inserting different SIMMs, follow the instructions under "Inserting SIMMs" to install them. Installing and Removing Options 4-15