Epson FX-85 User Manual - Page 48
ESCape Z - Quadruple-Density Graphics Mode selection
View all Epson FX-85 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
ESCape "Y" - High-Speed Double-Density Graphics Mode selection On the FX and RX, prints ESCape"L" graphics at twice the usual speed. There is one limitation: it will not print adjacent dots in the same row. ESCape "Z" - Quadruple-Density Graphics Mode selection On the FX and RX, prints 1920 dots per B-inch line; on the FX-100 and RX-100, prints 3264 dots per 13.6-inch line. Escape "^" - Nine-pin Graphics Mode selection On the FX and RX-100 only, speeds up screen dumps. ESCape "b" - Vertical tabbing. See Escape "/" . ESCape "e" - Horizontal and vertical tabbing On the RX-80 only, lets you set an increment to be used by CHR$(9), CHR$(137), or CHR$(11). Regardless of the current pitch, you set horizontal tabs in Pica pitch. After a tab is set, subsequent changes in line spacing or pitch do not affect its position. Escape "f" - Special horizontal and vertical spacing On the RX-80 only, lets you print up to 127 horizontal spaces or vertical line feeds. ESCape "i" - Immediate printing On the FX-80 only, causes character-by-character printing, as on a typewriter. Escape "j" - Reverse line-feed selection On the FX-80 only, causes a reverse line feed of n/216-inch in the current column. ESCape "1" - Left margin selection On the FX-80 and RX-80, lets you set the left margin for an B-inch line at 0 to 78 in Pica, 0 to 93 in Elite, and 0 to 133 in Compressed. On the RX-100 and FX-100, lets you set the left margin for a 13.6-inch line at 0 to 134 in Pica, 0 to 160 in Elite, and 0 to 229 in Compressed. ESCape "m" - Graphics character selection On the RX only, lets you print the graphics characters which are stored behind control codes 128 to 159. ESCape "p" - Proportional Mode selection On the FX only, prints characters proportionally, without excess space, in Emphasized Mode. 293