Epson FX-85 User Manual - Page 57
Changing form measurements, Tabbing, Graphics, The ESCapeN skip-over-per
View all Epson FX-85 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Changing form measurements The ESCape"C" command is not Don't set, form lengths of 0 or working properly. 128. The ESCape"N" skip-over-per- Don't set the skip larger than the foration doesn't work. form length. Tabbing Vertical tabs don't work correctly. Can't set vertical tabs greater than the form length. Each tab sequence must be terminated by a CHR$(0) or a number less than the last tab value. Horizontal tabs don't work cor- Each tab sequence must be termi- rectly. nated by a CHR$(0) or a number less than the last tab value. Horizontal tabs are incorrect when changing pitch. Tabs are set according to current print pitch. Changes in pitch do not affect the position of the tabs on the page. Graphics Strange things print. Some systems require a WIDTH statement. See your system documentation. Many computers have problems sending one or more of the codes 0 and 8 - 13. Avoid any that affect your system if possible. Alternatively, you can substitute the high-order versions, or you can POKE the problem codes directly to the printer. Seven-bit computers cannot use the eighth pin (128). If you have a 7-bit computer and your pin sequence is larger than 127, change it. 302