Epson Stylus Photo 1200 User Manual - Page 115
toward the back of the printer. Then press down the ink cartridge
View all Epson Stylus Photo 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
To avoid damaging the printer, never move the print head by hand. Don't open the clamp or remove a cartridge except to replace it with a new one. Once you remove a cartridge, you can't reuse it, even if it contains ink. 3 Make sure the printer is turned on and not printing, then open the printer cover. 4 Press the E load/eject button and hold it down for three seconds until the print head moves to the left and the P power light begins flashing. 5 Pull up the ink cartridge clamp. The cartridge rises up from its holder. 6 Lift the cartridge out of the printer and dispose of it carefully. 7 Lower the new ink cartridge into its holder with the label facing up and toward the back of the printer. Then press down the ink cartridge clamp until it locks in place. If ink gets on your hands, wash them thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. 8 If you need to replace the other ink cartridge, repeat steps 5 through 7 before going on to step 9.