Epson Stylus Photo 1200 User Manual - Page 80
EPSON Panoramic Photo Paper
View all Epson Stylus Photo 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Be sure to support your Panoramic Photo Paper or Banner Photo Paper as it ejects from the printer so it doesn't fall onto the floor. You can use Panoramic Photo Paper to print large format panoramic photos. Before loading the paper, make sure it's flat; if it curls, place it between two sheets of paper and put a heavy object on top to flatten it. Before loading the paper, pull the printer's paper support extension all the way up. Then load the paper one sheet at a time, printable side up. While holding the paper up by its top edge, press and release the E load/eject button to feed the paper into the printer. Select Photo Paper as the Media Type and Panoramic 210 × 594 mm as the Paper Size in your printer software. You can use Banner Photo Paper on a roll to print photographic banners, panoramas, and signs up to 44 inches long. Before loading the paper, cut it to the desired length of your image plus 2 inches to account for the necessary margins. Make sure the cut sheet is flat; if it curls, flatten it following the instructions included in the paper package. Then remove the printer's paper support and load the paper one sheet at a time, printable side up. Support the paper from underneath or by its edges, then press and release the E load/eject button to feed the paper into the printer. Select Photo Paper as the Media Type and Banner as the Paper Source in your printer software. Don't select PhotoEnhance3 when printing on Banner Photo Paper. An accessory Roll Paper Holder (0 10343 81750 0) is available for loading Banner Photo Paper. Contact your EPSON dealer or call EPSON Accessories at the number listed in Where To Get Help to order it.