Fluke 719PRO-300G Product Manual - Page 68
St_close?, St_open?, St_dead?, Temp_unit, Temp_unit?, Zero_meas, Zero_meas
View all Fluke 719PRO-300G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
719PRO Users Manual ST_CLOSE? Returns the pressure that the switch closed at in the current pressure units. ST_OPEN? Returns the pressure that the switch opened at in the current pressure units. ST_DEAD? Returns deadband of the switch in the current pressure units. TEMP_UNIT This command is used to set the temperature unit used when temperature is measured. The first argument indicates which display to apply the change to. The second argument is the unit, either CEL for Celsius or FAR for Fahrenheit. For example: To set the temperature unit to Fahrenheit on the lower display, send TEMP_UNIT LOWER, FAR. TEMP_UNIT? Returns the temperature unit, (CEL or FAR) used when RTDs are measured for each of the 3 displays. VAL? Returns the value of any measurement on the upper and lower display. For example, if the upper display shows 5 mA, and the lower display shows 10 V, then VAL? returns: 5.000000E-03, A, 1.000000E+01, V ZERO_MEAS Zeros the attached pressure module. Enter the value zeroed in PSI after the command when an absolute pressure module is zeroed. ZERO_MEAS? Returns the zero offset or the reference value for absolute pressure modules. 58 MyFlukeStore Shop for Fluke products online at: www. .com 1.888.610.7664