Foxconn FlamingBlade GTI English Manual. - Page 41
USB Device Setting
View all Foxconn FlamingBlade GTI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
3 USB Device Setting Phoenix - AwardBIOS CMOS Setup Utility USB Device Setting USB 1.0 Controller Enabled Item Help USB 2.0 Controller Enabled USB Operation Mode High Speed Menu Level ► USB Storage Function Enabled [Enable] or [Disable] *** USB Mass Storage Device Boot Setting *** Universal Host Controller Interface for Universal Serial Bus. Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F7:Optimized Defaults ► USB 1.0 Controller This item is used to enable or disable the Universal Host Controller Interface for USB. ► USB 2.0 Controller This item is used to enable or disable the Enhanced Host Controller Interface for USB. ► USB Operation Mode This item is used to set the USB operation mode. If you select the [High Speed], then the USB operation mode is determined by the USB device; select [Full/Low Speed], the USB device operates on full/low speed. ► USB Storage Function This option is used to set whether the USB Mass Storage controller is enabled in a legacy operating system (such as DOS). ► ***USB Mass Storage Device Boot Setting*** BIOS auto detects the presence of USB Mass Storage Devices, you can configure the Boot setting mode for the detected USB MSD. 34