Foxconn FlamingBlade GTI English Manual. - Page 44

3 Power-On Function Phoenix - AwardBIOS CMOS Setup Utility Power-On Function Wake-Up by PCI/PCIe Enabled Item Help USB KB/MS Wake-Up From S3 Disabled Power-On Function Button Only Menu Level ► x PS2 KB Power-On Password Enter x PS2 Hot Key Power-On Ctrl-F1 If enabled any PCI or PCIe device can wake the system up. This includes LAN Devices Wake-On-Lan) Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F7:Optimized Defaults ► Wake-Up by PCI/PCIe This item is used to set the system to wake up by PCI/PCIe card. ► USB KB/MS Wake-Up From S3 This item is used to set the system to wake up by USB KB/MS when it is in S3(Suspend to RAM) mode. ► Power-On Function This item allows you to use the keyboard or mouse to wake up the system from S3 mode. This feature requires an ATX power supply. The setting values: [Password]; [Hot Key]; [Any Key]; [Button Only] and [Keyboard 98]. ► PS2 KB Power-On Password When "Power-On Function" is set to [Password], this item allows you to input a password to wake up the system from S3 mode. ► PS2 Hot Key Power-On When "Power-On Function" is set to [Hot Key], this item allows you to press a [Ctrl] + Function key to wake up the system from S3 mode. 37