Foxconn FlamingBlade GTI English Manual. - Page 54
All Voltage Settings
View all Foxconn FlamingBlade GTI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
3 All Voltage Settings Phoenix - AwardBIOS CMOS Setup Utility All Voltage Settings CPU Voltages Item Help x CPU Core Voltage Default CPU Target Core Voltage 1.08750 Menu Level ► x CPU Vdroop Compensation Disabled x CPU VTT (UnCore) Voltage Default x 1.8V PLL Voltage Setting 1.800V x CPU Clock Amplitude Ctrl 0.800V Memory Voltages ********* x DRAM Voltage 1.60V x DIMM1 Vref CA (Address) x 0.500 x DIMM1 Vref DQ (Data) x 0.500 x DIMM2 Vref CA (Address) x 0.500 x DIMM2 Vref DQ (Data) x 0.500 x DIMM3 Vref CA (Address) x 0.500 x DIMM3 Vref DQ (Data) x 0.500 Chipset Voltages ********* x X58 IOH Core Voltage 1.10V Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F7:Optimized Defaults Note: When "System Turbo" in "Quantum BIOS" is set to "Enabled", the following items are valid CPU Voltages *********** ► CPU Core Voltage This item is used to set CPU Core Voltage. The maximum voltage available for adjustment is 1260mV, one step is 10mV. Warning: Adjusting the "Target CPU Voltage" beyond the default CPU voltage could result in damage to the CPU. ► CPU Target Core Voltage This item shows the CPU target core voltage. ► CPU Vdroop Compensation Warning: Adjusting this item to Enabled could result in damage to the board. ► CPU VTT (UnCore) Voltage This item is used to set CPU VTT Voltage. The maximum voltage available for adjustment is 1260mV, one step is 20mV. Warning: Adjusting the voltage beyond the CPU VTT default voltage could result in damage to the CPU. ► 1.8V PLL Voltage Setting This item is used to set CPU PLL Voltage. Isolated power for QPI PLL, default voltage is 1.8V. Warning: Adjusting the voltage beyond the QPI default voltage could result in damage to the board. ► CPU Clock Amplitude Ctrl CPU differential output amplitude control, default value is 800mV, may help FSB O.C. ********* Memory Voltages DRAM Voltage The maximum voltage available for adjustment is 2.86V. Warning: Adjusting the voltage beyond the memories default voltage could result in damage to the memory controller, the default voltage is 1.60V 47