Foxconn FlamingBlade GTI English Manual. - Page 45

3 PnP/PCI Configurations Phoenix - AwardBIOS CMOS Setup Utility PnP/PCI Configurations Init Display First PCI Slot Item Help Reset Configuration Data Disabled Menu Level ► Resources Controlled By Auto (ESCD) x IRQ Resources Press Enter INT Pin 1 Assignment Auto INT Pin 2 Assignment Auto INT Pin 3 Assignment Auto INT Pin 4 Assignment Auto INT Pin 5 Assignment Auto INT Pin 6 Assignment Auto INT Pin 7 Assignment Auto INT Pin 8 Assignment Auto Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F7:Optimized Defaults ► Init Display First This item is used to choose the initial display device which will be used first when your PC starts up. Options are : [PCI Slot] and [PCIEx]. ► Reset Configuration Data This item is used to enable or disable the reset configuration data function. ► Resources Controlled By This item is used to define the system resource control scheme. If all cards you use support PnP, then select [Auto] and the BIOS will automatically distribute interruption resources. If the PCI cards you installed need special IRQ resources, you will need to select [Manual] and manually adjust interruption resources in the event of hardware conflicts. ► IRQ Resources When "Resources Controlled By" is set to "Manual", this item is available. You can press the key, then manually set IRQ resources. ► INT Pin 1/2/3/4/5/6/7/8 Assignment This item is used to assign IRQ resources for INT Pin 1/2/3/4/5/6/7/8. Default INT Pin assignments can be found from the help menu. 38