Garmin GPSMAP 4210 Owner's Manual - Page 6
Turning on the Chartplotter, Initializing Chartplotter Settings, Power, Metric - specifications
View all Garmin GPSMAP 4210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Getting Started Getting Started Turning on the Chartplotter Note: The first time you power on your chartplotter, you must go through a setup sequence. See "Initializing Chartplotter Settings" (page 2). 1. Press and release the Power key. After a few moments, the Warning screen appears. Warning Screen 2. Press SELECT to open the Home screen. Turning Off the Chartplotter Press and hold the Power key. Home Screen Initializing Chartplotter Settings The first time you turn on your chartplotter, you must configure a series of initial settings. These settings must also be configured when restoring original factory settings (page 4). All of these settings can be configured later from the Configure screen (page 35). The initial settings are as follows: • Language-select the language that will be shown on your screen. • Welcome-select OK. • Position Format-specify the coordinate system to use for location readings. • Time Format-select 12-hour, 24-hour, or UTC (Universal Time Code) to specify the format in which time is displayed. • Time Zone-select your time zone. • Units-select Statute, Metric, or Nautical to specify units for onscreen measurements. • Minimum Safe Depth-specify the minimum safe depth for your boat. Refer to your boat specifications for more information. • Minimum Overhead Clearance-specify the minimum overhead clearance for your boat. Refer to your boat specifications for more information. GPSMAP 4000 Series Owner's Manual