Garmin iQue 3000 Operating Instructions - Page 10
Resetting Your iQue, To perform a soft reset
UPC - 753759049812
View all Garmin iQue 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
INTRODUCTION > RESETTING YOUR IQUE Resetting Your iQue You may need to perform a reset if your handheld no longer responds to stylus taps or button presses. A soft reset allows your handheld to get a fresh start, similar to rebooting a PC. All records and entries are retained after a soft reset. To perform a soft reset: Use the stylus to press and release the Reset button inside the hole on the back of the handheld. Reset Button A hard reset erases all records and entries stored in your handheld. Never perform a hard reset unless a soft reset does not correct your problem. When you perform your next HotSync® operation, you can restore any data that you previously synchronized to your computer. To perform a hard reset: 1. Press the Reset button as described above. 2. Immediately after you release the Reset button, press and hold the Power button until you see the Palm Powered™ logo. Then release the Power button. 3. When a message appears on the screen warning that all data stored on the handheld is about to be erased, do one of the following: • Complete the hard reset by pressing the upper half of the scroll button on the front of the handheld. The Digitizer screen appears. • Press any other button to perform a soft reset. NOTE: When you perform a hard reset, the current date and time are retained. Formats, preferences, and other settings are restored to their factory default settings. 6 iQue® 3000 Operating Instructions