HP 2410 HP PSC 2400 Photosmart series All-in-One - (English) Reference Guide - Page 105
Retain the front panel cover. Do not return the front panel cover with the HP PSC.
![]() |
View all HP 2410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
get hp psc support 7 Remove the front panel cover as follows: a. Make sure the color graphics display is lying flat against the HP PSC. b. Place your finger on the top right corner of the front panel cover. c. Gently pry the corner up and lift the front panel cover from the device as shown below. Tip: You can also use a thin, flat object, such as a credit card, to lift the front panel cover. Gently slide the credit card at a slight angle, about 45 degrees, between the color graphics display and the front panel cover. Apply slight downward pressure to lift the front panel cover. 8 Retain the front panel cover. Do not return the front panel cover with the HP PSC. 9 If available, pack the HP PSC for shipment by using the original packing materials or the packaging materials that came with your exchange device. If you do not have the original packaging materials, please use other adequate packaging materials. Shipping damage caused by improper packaging and/or improper transportation is not covered under the warranty. reference guide 95 hp psc support
![](/manual_guide/products/hewlettpackard-2410-hp-psc-2400-photosmart-series-allinone-english-reference-guide-f5fcf88/105.png)