HP 2410 HP PSC 2400 Photosmart series All-in-One - (English) Reference Guide - Page 23
load the input tray, load originals & paper
View all HP 2410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
load originals & paper load originals and load paper load the input tray 1 Remove the output tray, and slide the paper-width and paper-length guides to their outermost positions. 2 Tap a stack of paper on a flat surface to align the edges, and then check to make sure all of the paper in the stack is the same size and type. 3 Slide the short edge of the paper forward into the input tray with the print side down until it stops. If you are using letterhead, insert the top of the page first with the print side down. 4 Slide the paper-width and paper-length guides inward until they stop at the edges of the paper. Make sure that the paper stack lies flat in the input tray and is stacked no higher than the paper-length guide. 5 Replace the output tray. reference guide 13