HP 2410 HP PSC 2400 Photosmart series All-in-One - (English) Reference Guide - Page 153
My HP PSC does - remove and check print cartridges
View all HP 2410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
troubleshooting troubleshooting information problem I received a message on the front panel display to align the print cartridges possible cause and solution The HP PSC prompts you to align cartridges every time you install a new print cartridge. For more information, see align the print cartridges on page 86. My HP PSC does not turn on Make sure each of the power cords is firmly connected, and wait a few seconds for the HP PSC to turn on. Also, if the HP PSC is plugged in to a power strip, make sure the power strip is turned on. The HP PSC does not print First check to see whether the print cartridge is out of ink. To do this, see print a self-test report on page 81. However, before you do this, check the print cartridge to make sure you have properly removed its packaging. Being careful not to touch the copper contacts or ink nozzles, make sure you have gently pulled the pink tab to remove the plastic tape. If you determine that you need to replace a print cartridge see replace the print cartridges on page 83. I received a message on the front panel display about a paper jam or a blocked carriage If either a paper jam or blocked carriage error message appears in the front panel display, there might be some packing material inside the HP PSC. Lift open the print-carriage access door to expose the print cartridges and remove any packing material or other items that do not belong there. reference guide 143