HP 2410 HP PSC 2400 Photosmart series All-in-One - (English) Reference Guide - Page 66
enable fax confirmation, send a basic fax - fax instructions
![]() |
View all HP 2410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
fax chapter 6 enable fax confirmation By default, your HP PSC prints a report only if there is a problem with sending or receiving a fax. A confirmation message indicating whether an item was successfully sent appears briefly on the color graphics display after each transaction. If you need printed confirmation that your faxes are successfully sent, follow these instructions before sending any faxes. 1 Press Setup. 2 Press 1, then press 5. This selects Print Report and then selects Fax Report Setup. Print Report 1. Last Transaction 2. Fax Log 3. Speed Dial List 4. Self-Test Report 5. Fax Report Setup Fax Report Setup 1. Every Error 2. Send Error 3. Receive Error 4. Every Fax 5. Send Only 6. Off 3 Press 5, then press OK. This selects Send Only. Note: You will still receive printed reports for any errors that occur during faxing if you select the Send Only report. For more information on printing reports, see print reports on page 62. send a basic fax This section describes how to send a basic black-and-white fax. If you are interested in sending a multiple-page fax, see send a two-page blackand-white fax on page 57. You can also send a color or photo fax. For more information, see send a color original or photo fax on page 57. 1 Load the first page face down on the right front corner of the glass. For more information, see load an original on page 11. 2 Press Fax. The Enter Fax Number screen appears. 3 Enter the fax number. Tip: To enter a three-second pause within a number sequence, press the pound (#) button repeatedly, until a dash appears on the color graphics display. 56 hp psc 2400 series
![](/manual_guide/products/hewlettpackard-2410-hp-psc-2400-photosmart-series-allinone-english-reference-guide-f5fcf88/66.png)