HP 3600dn HP Jetdirect Print Server Administrator's Guide - Page 65
Restore Defaults, Authorization, Admin. Account, Access Control
UPC - 829160888897
View all HP 3600dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Table 4-6 Wizard Security Levels (continued) Security Level Description The Access Control page is used to set up an Access Control List, if desired to control host access to the device. The Print Protocols and Services page is used to enable or disable network printing, print services, and device discovery protocols that may affect security. The Configuration Review page displays all the current settings that may affect security. Click Finish to set your basic security selections. Restore Defaults This page is used to restore security configuration settings to factory defaults. The default settings displayed depend on the features supported by the print server. Only the security settings listed are restored to factory defaults, other configuration settings are not affected. Authorization The Authorization page provides tabs that allow you to control access to the device, as well as to device configuration and management features. Admin. Account Use this page to set an administrator password for controlled access to Jetdirect configuration and status information. The administrator password is shared by Jetdirect configuration tools, such as the embedded Web server, Telnet, and HP Web Jetadmin. If a password is set and you attempt to access Jetdirect print server settings, you will be prompted for a user name and this password before you are allowed access. NOTE The administrator password may be cleared by a cold reset of the print server, which resets the print server to factory default settings. A checkbox allows you to synchronize HP Web Jetadmin and the SNMP v1/v2c Set Community Name. If you enable this feature (the checkbox is checked), the administrator password will also be used as the SNMP Set Community Name for SNMP v1/v2c management applications. NOTE If you subsequently change the SNMP Set Community Name (for example, using the SNMP tab on the Network Settings page or from Web Jetadmin), the two settings will no longer be synchronized. Access Control Use this tab to display the Access Control List (ACL) on the HP Jetdirect print server. An access control list (or host access list) specifies individual host systems, or networks of host systems, that will be allowed to access the printer. Up to 10 entries can be included on the list. If the list is empty (no hosts are listed), any supported system can access the print server. ENWW Networking Tab 57