HP 3600dn HP Jetdirect Print Server Administrator's Guide - Page 79
Jetdirect, Configuration, Use the following Telnet command
UPC - 829160888897
View all HP 3600dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Use the following Telnet command: telnet where is the IP address assigned to the HP Jetdirect print server and is 9100, the default printing port of the print server. In the Telnet session, type in data and press Enter. The data should print to the printer (a manual form feed may be required). 10 Does the printer appear in HP Web Jetadmin or other management application? ● Verify network and HP Jetdirect settings on the Jetdirect configuration page. See HP Jetdirect Configuration Page for information on the configuration page. ● Confirm the network settings for the printer using the printer control panel. ● See the troubleshooting section in the online help included with the HP Web Jetadmin software. ENWW General Troubleshooting 71
Use the following Telnet command:
telnet <IP address> <port>
where
<IP address>
is the IP address assigned to the HP Jetdirect print server and
<port>
is
9100, the default printing port of the print server.
In the Telnet session, type in data and press
Enter
. The data should print to the printer (a
manual form feed may be required).
10
Does the printer appear in HP Web Jetadmin or other management application?
●
Verify network and HP Jetdirect settings on the Jetdirect configuration page. See
HP
Jetdirect
Configuration
Page
for information on the configuration page.
●
Confirm the network settings for the printer using the printer control panel.
●
See the troubleshooting section in the online help included with the HP Web Jetadmin
software.
ENWW
General Troubleshooting
71