HP 3600dn HP Jetdirect Print Server Administrator's Guide - Page 99
The HP Jetdirect Control Panel Menu, Parameter Descriptions
UPC - 829160888897
View all HP 3600dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
B The HP Jetdirect Control Panel Menu HP Jetdirect embedded print servers provide a configuration menu that can be accessed from the printer's control panel. The keystrokes to access this menu from the printer control panel depend on the printer. Refer to your printer User guide, or print a control panel menu map, for more information. The printer's graphical control panel is used to access the Jetdirect print server menu items. Graphical control panels typically display 18 characters on a line, and as many as four lines at a time. In addition, scrolling may be supported to allow display of additional lines. ? On graphical control panels, navigation buttons are used to access HP Jetdirect menu items. Parameter Descriptions For a description of menu items and options, see the following table. Table B-1 HP Jetdirect Control Panel Menu Menu Item TCP/IP Options ENABLE Description of settings ■ ON: Enable the TCP/IP protocol ■ OFF: Disable the TCP/IP protocol HOST NAME CONFIG METHOD An alphanumeric string, up to 32 characters, used to identify the device. This name is listed on the Jetdirect configuration page. The default host name is NPIxxxxxx, where xxxxxx is the last six digits of the LAN hardware (MAC) address. Specifies the method that TCP/IP parameters will be configured on the Jetdirect print server. ■ BOOTP: Use BootP (Bootstrap Protocol) for automatic configuration from a BootP server. ■ DHCP: Use DHCP (Dynamic Host Configuration Protocol) for automatic configuration from a DHCP server. If selected and a DHCP lease exists, DHCP RELEASE and DHCP RENEW menus will be available to set DHCP lease options. ENWW Parameter Descriptions 91