HP 5100tn HP LaserJet 5100Le printer - User Guide - Page 115
Custom Paper=yes, Pcl Font Pitch
View all HP 5100tn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Printing Menu (Continued) Item Values X DIMENSION= 12.28 INCHES (110V printers) or312 MILLIMETERS (220V printers) 3.00 to 12.28 INCHES (110V printers) or 76 to 312 MILLIMETERS (220V printers) Y DIMENSION= 18.50 INCHES (110V printers) or 470 MILLIMETERS (220V printers) 5.00 to 18.50 INCHES (110V printers) or 127 to 470 MILLIMETERS (220V printers) ORIENTATION= PORTRAIT PORTRAIT LANDSCAPE FORM=60 LINES (110V printers) or 64 LINES (220V printers) PCL FONT SOURCE=INTERNAL 5 to 128 INTERNAL SOFT SLOT 1, 2, or 3 PCL FONT NUMBER= 0 to 999 0 PCL FONT PITCH= 10.00 0.44 to 99.99 Explanation This item appears only when CONFIGURE CUSTOM PAPER=YES. Select the dimension to be fed into the printer. Note Heavy paper and very small or very large custom-size paper should be printed from Tray 1 to the rear output bin. Open the rear output bin to use it (page 22). This item appears only when CONFIGURE CUSTOM PAPER=YES. Select the other dimension. Note Heavy paper and very small or very large custom-size paper should be printed from Tray 1 to the rear output bin. Open the rear output bin to use it (page 22). Determine the default orientation of print on the page. Note It is best to set the page orientation from the printer driver or software application. (Driver and software settings override control panel settings.) Sets vertical spacing from 5 to 128 lines for default paper size. Press [-Value+] once to change the setting by increments of 1, or hold down [-Value+] to scroll by increments of 10. INTERNAL: Internal fonts. SOFT: Permanent soft fonts. SLOT 1, 2, or 3: Fonts stored in one of the three DIMM slots. The printer assigns a number to each font and lists them on the PCL Font List (page 82). The font number appears in the Font # column of the printout. This item might not appear, depending on the font selected. Press [-Value+] once to change setting by increments of .01 for pitch, or hold down [-Value+] to scroll by increments of 1. ENWW Control Panel Menus B-9