HP 5100tn HP LaserJet 5100Le printer - User Guide - Page 99
Vellum, Envelopes, Envelope Construction
View all HP 5100tn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Vellum Vellum is special lightweight paper similar to parchment. Print vellum from Tray 1 only, and open the rear output bin. Do not print on both sides of vellum. Vellum used in the printer must be able to withstand 400° F (205° C), the printer's maximum temperature, for 0.1 second. To print vellum, see page 38. Envelopes Envelope Construction Envelope construction is critical. Envelope fold lines can vary considerably, not only between manufacturers, but also within a box from the same manufacturer. Successful printing on envelopes depends upon the quality of the envelopes. When selecting envelopes, consider the following components: • Weight: The weight of the envelope paper should not exceed 28 lb (105 g/m2), or jamming may result. • Construction: Prior to printing, envelopes should lie flat with less than 0.25 inch (6 mm) curl, and should not contain air. (Envelopes that trap air may cause problems.) • Condition: Make sure envelopes are not wrinkled, nicked, or otherwise damaged. • Sizes in Tray 1: From 3 by 5 inches (76 by 127 mm) to 8.5 by 14 inches (216 by 356 mm) 12.28 by 18.5 inches (312 by 470 mm). Always print envelopes from Tray 1 (page 29). To prevent envelopes from wrinkling or jamming, open the rear output bin. ENWW Specifications A-9