HP 5100tn HP LaserJet 5100Le printer - User Guide - Page 38
Loading Envelopes in Tray 1, forcing them.
View all HP 5100tn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Loading Envelopes in Tray 1 1 Open Tray 1 and pull out the tray extension. If the envelopes are longer than 9 inches (229 mm), flip open the second tray extension. 2 Open the rear output bin and pull out the tray extension. (This reduces envelope curl and wrinkling.) 3 Load up to 10 envelopes in the center of Tray 1 with the side-to-be-printed facing up, and the postage-end toward the front of the tray. Slide the envelopes into the printer as far as they will go without forcing them. 4 Adjust the guides to touch the envelope stack without bending the envelopes. Make sure the envelopes fit under the tabs on the guides. 34 Chapter 2: Printing Tasks ENWW
34
Chapter 2:
Printing Tasks
ENWW
Loading Envelopes in Tray 1
1
Open Tray 1 and pull out the tray
extension. If the envelopes are
longer than 9 inches (229 mm), flip
open the second tray extension.
2
Open the rear output bin and pull out
the tray extension. (This reduces
envelope curl and wrinkling.)
3
Load up to 10 envelopes in the
center of Tray 1 with the
side-to-be-printed facing up, and the
postage-end toward the front of the
tray. Slide the envelopes into the
printer as far as they will go without
forcing them.
4
Adjust the guides to touch the
envelope stack without bending the
envelopes. Make sure the
envelopes fit under the tabs on the
guides.