HP 5310m HP ProBook 5310m Notebook PC - Maintenance and Service Guide - Page 59
One Torx T8M2.5×9.0 screw, One Phillips PM2.5×2.0 broadhead screw - keyboard
UPC - 884962601266
View all HP 5310m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Removal and replacement procedures Remove the keyboard: 1. Position the computer with the front toward you. 2. Remove the following screws: ❏ Two Torx T8M2.5×5.0 screws 1 in the mass storage device bay and the wireless module compartment ❏ One Phillips PM2.5×2.0 broadhead screw 2 in the battery bay ❏ One Torx T8M2.5×9.0 screw 3 3. Turn the computer display-side up, with the front toward you. 4. Open the computer as far as possible. 5. Lift the rear edge of the keyboard 1 until it rests at an angle. 6. Slide the keyboard 2 back until it rests on the display. Maintenance and Service Guide 4-23
Removal and replacement procedures
Maintenance and Service Guide
4–23
Remove the keyboard:
1. Position the computer with the front toward you.
2. Remove the following screws:
❏
Two Torx T8M2.5×5.0 screws
1
in the mass storage device bay and the wireless module compartment
❏
One Phillips PM2.5×2.0 broadhead screw
2
in the battery bay
❏
One Torx T8M2.5×9.0 screw
3
3. Turn the computer display-side up, with the front toward you.
4. Open the computer as far as possible.
5. Lift the rear edge of the keyboard
1
until it rests at an angle.
6. Slide the keyboard
2
back until it rests on the display.