HP 5310m HP ProBook 5310m Notebook PC - Maintenance and Service Guide - Page 75

USB board, Remove the two Torx T8M2.5×4.0 screws

Get HP 5310m - ProBook - Core 2 Duo 2.26 GHz PDF manuals and user guides
UPC - 884962601266
View all HP 5310m manuals
Add to My Manuals
Save this manual to your list of manuals

Page 75 highlights

USB board Removal and replacement procedures Description USB board (includes cable) Spare part number 581080-001 Before removing the USB board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-7). 5. Remove the following components: a. Accessory cover (see "Mass storage device" on page 4-9) b. Keyboard (see "Keyboard" on page 4-22) c. Button board and cable (see "Button board and cable" on page 4-25) d. Top cover (see "Top cover" on page 4-27) e. System board (see "System board" on page 4-32) Remove the USB board: 1. Disconnect the microphone cable 1 from the USB board. 2. Remove the two Torx T8M2.5×4.0 screws 2 that secure the USB board to the base enclosure. 3. Remove the USB board 3 and cable. Reverse this procedure to install the USB board. Maintenance and Service Guide 4-39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
Removal and replacement procedures
Maintenance and Service Guide
4–39
USB board
Before removing the USB board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
“Battery” on page 4-7
).
5. Remove the following components:
a.
Accessory cover (see
“Mass storage device” on page 4-9
)
b.
Keyboard (see
“Keyboard” on page 4-22
)
c.
Button board and cable (see
“Button board and cable” on page 4-25
)
d.
Top cover (see
“Top cover” on page 4-27
)
e.
System board (see
“System board” on page 4-32
)
Remove the USB board:
1. Disconnect the microphone cable
1
from the USB board.
2. Remove the two Torx T8M2.5×4.0 screws
2
that secure the USB board to the base enclosure.
3. Remove the USB board
3
and cable.
Reverse this procedure to install the USB board.
Description
Spare part number
USB board (includes cable)
581080-001