HP 5310m HP ProBook 5310m Notebook PC - Maintenance and Service Guide - Page 70
by sliding it away from the base enclosure at an angle.
UPC - 884962601266
View all HP 5310m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Removal and replacement procedures 9. Remove the three Torx T8M2.5×4.0 screws that secure the system board to the base enclosure. 10. Lift the left side of the system board 1 until it rests at an angle. 11. Remove the system board 2 by sliding it away from the base enclosure at an angle. Reverse this procedure to install the system board. 4-34 Maintenance and Service Guide
4–34
Maintenance and Service Guide
Removal and replacement procedures
9. Remove the three Torx T8M2.5×4.0 screws that secure the system board to the base enclosure.
10. Lift the left side of the system board
1
until it rests at an angle.
11. Remove the system board
2
by sliding it away from the base enclosure at an angle.
Reverse this procedure to install the system board.