HP 5310m HP ProBook 5310m Notebook PC - Maintenance and Service Guide - Page 69
Release the ZIF connector, Disconnect the display panel cable
UPC - 884962601266
View all HP 5310m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Remove the system board: 1. Turn the computer upside down, with the front toward you. 2. Disconnect the SD Card Reader board cable from the system board. Removal and replacement procedures 3. Turn the computer display-side up, with the front toward you. 4. Open the computer as far as possible. 5. Disconnect the speaker cable 1 from the system board. 6. Disconnect the display panel cable 2 from the system board. 7. Release the ZIF connector 3 to which the power button board board cable is attached, and then disconnect the cable from the system board. 8. Disconnect the power cable 4 from the system board. Maintenance and Service Guide 4-33
Removal and replacement procedures
Maintenance and Service Guide
4–33
Remove the system board:
1. Turn the computer upside down, with the front toward you.
2. Disconnect the SD Card Reader board cable from the system board.
3. Turn the computer display-side up, with the front toward you.
4. Open the computer as far as possible.
5. Disconnect the speaker cable
1
from the system board.
6. Disconnect the display panel cable
2
from the system board.
7. Release the ZIF connector
3
to which the power button board board cable is attached, and then disconnect the
cable from the system board.
8. Disconnect the power cable
4
from the system board.