HP 680n HP Wireless Print Server 680n - (English) Setup Guide - Page 27
Making a Wireless Network Connection, Before You Begin
![]() |
UPC - 808736198622
View all HP 680n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
3 Making a Wireless Network Connection Before You Begin... This chapter describes how to configure the Jetdirect print server with a wireless network connection to your network. A wireless network connection is required before you can discover and install the printer on your network systems. To configure a wireless connection, you must have a wireless computer that can run the HP wireless connection utilities. Verify the following: ● You have a wireless computer with one of the following operating systems: ■ Microsoft Windows 98, Me, NT 4.0, 2000, XP ■ Apple Mac OS 9.x, X 10.1 or greater ● Your system's wireless configuration utility and interface card are working properly. ● You have installed the HP Jetdirect print server hardware and have printed a Jetdirect configuration page. ● (Infrastructure mode only) The Access Point on your network is operating properly. CAUTION If you reset the print server to factory-default values after you configure a wireless network connection, the network connection will be lost. To re-establish a connection, you will need to reconfigure the print server again. Making a Wireless Network Connection 3-1
![](/manual_guide/products/hewlettpackard-680n-hp-wireless-print-server-680n-english-setup-guide-adbf8b6/27.png)