HP 680n HP Wireless Print Server 680n - (English) Setup Guide - Page 79
Table C-2, HP Jetdirect Graphical Control Panel Menu 6 of 9
![]() |
UPC - 808736198622
View all HP 680n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Table C-2 HP Jetdirect Graphical Control Panel Menu (6 of 9) Menu Item 802.11b (Continued) Options RESET 802.11b Description of settings ● YES: Choose to reset the 802.11b wireless parameters on the print server to factory-default values. Parameter values for other network protocols are not reset. To view reset values, you must exit and re-enter the control panel menu. ● NO (default): 802.11b wireless parameters are not reset. TCP/IP ENABLE HOST NAME CONFIG METHOD ● ON: Enable the TCP/IP protocol. ● OFF: Disable the TCP/IP protocol. Specifies an alphanumeric string, up to 32 characters, used to identify the device. This name is listed on the Jetdirect configuration page. The default host name is NPIxxxxxx, where xxxxxx is the last six digits of the LAN hardware (MAC) address. Specifies the method that TCP/IP parameters will be configured on the Jetdirect print server. ● BOOTP: Use BootP (Bootstrap Protocol) for automatic configuration from a BootP server. ● DHCP: Use DHCP (Dynamic Host Configuration Protocol) for automatic configuration from a DHCP server. ● MANUAL: Use the Manual Settings option to configure TCP/IP parameters. HP Jetdirect EIO Control Panel Menus C-13
![](/manual_guide/products/hewlettpackard-680n-hp-wireless-print-server-680n-english-setup-guide-adbf8b6/79.png)