HP 680n HP Wireless Print Server 680n - (English) Setup Guide - Page 34
Optional Wireless Connection Setup Methods
UPC - 808736198622
View all HP 680n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Optional Wireless Connection Setup Methods Note To use Telnet or the embedded Web server, you must first reconfigure your wireless computer's settings to match the HP Jetdirect factory-default settings, and then create an IP path to the default IP address (192.0.0.192) on the print server. To create an IP path, use one of the following methods: ● If supported, use a "route add" command from your system prompt (see your system help or documentation), or ● Temporarily reconfigure your computer's IP address to match the default IP network of the Jetdirect print server (for example, use 192.0.0.193). You should record your current settings, or if possible, create a new profile for your temporary settings. Optional methods to configure a wireless network connection include: ● Using a Telnet session with the HP Jetdirect print server to configure selected wireless parameters (not all wireless parameters can be set through Telnet). For information on available Telnet commands, use the Telnet help (?) command. Also, refer to the HP Jetdirect Administrator's Guide for this print server model, supplied on the HP Jetdirect CD-ROM. 3-8 Making a Wireless Network Connection