HP 680n HP Wireless Print Server 680n - (English) Setup Guide - Page 81
Table C-2, HP Jetdirect Graphical Control Panel Menu 8 of 9
![]() |
UPC - 808736198622
View all HP 680n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Table C-2 HP Jetdirect Graphical Control Panel Menu (8 of 9) Menu Item TCP/IP (Continued) IPX/SPX ATALK Options Description of settings MANUAL SETTINGS (Available only if CONFIG METHOD is set to MANUAL) Configure parameters directly from the printer control panel: ● IP ADDRESS n.n.n.n: The unique IP address of the printer, where n is a value from 0 to 255. ● SUBNET MASK m.m.m.m: The subnet mask for the printer, where m is a value from 0 to 255. ● SYSLOG SERVER n.n.n.n: The IP address of the syslog server used to receive and log syslog messages. ● DEFAULT GATEWAY n.n.n.n: The IP address of the gateway or router used for communications with other networks. ● IDLE TIMEOUT: The time period, in seconds, after which an idle TCP print data connection is closed (default is 270 seconds, 0 disables the timeout). ENABLE ● ON: Enable the IPX/SPX protocol. ● OFF: Disable the IPX/SPX protocol. FRAME TYPE Selects the frame type setting for your network. ● AUTO: (Default) automatically sets and limits the frame type to the first one detected. ● EN_8023, EN_II, EN_8022, EN_SNAP are frame type selections for Ethernet networks. ENABLE (Ethernet/Fast Ethernet only) ● ON: Enable the AppleTalk protocol. ● OFF: Disable the AppleTalk protocol. HP Jetdirect EIO Control Panel Menus C-15
![](/manual_guide/products/hewlettpackard-680n-hp-wireless-print-server-680n-english-setup-guide-adbf8b6/81.png)