HP 680n HP Wireless Print Server 680n - (English) Setup Guide - Page 78
Table C-2, HP Jetdirect Graphical Control Panel Menu 5 of 9, C-12 HP Jetdirect EIO Control Panel Menus
UPC - 808736198622
View all HP 680n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Table C-2 HP Jetdirect Graphical Control Panel Menu (5 of 9) Menu Item 802.11b (Continued) Options CONFIGURE KEYS Description of settings This menu appears only if 128-bit WEP or 64-bit WEP are selected. Use this menu to assign the transmit key position and WEP key values. Four key positions (key 1, 2, 3, or 4) are available, but the selected key must contain a valid WEP key value. If a valid WEP key is not assigned, the first key found with a valid key will be assigned. ● TRANSMIT KEY: Select the active transmit key position (key 1, 2, 3, 4). ● ENTRY METHOD: Select the format for entering WEP key values. ■ HEX: Enter values using hexadecimal numbers (0 - 9, a - f, or A - F). ■ ALPHANUMERIC: Enter values using the allowed alphanumeric ASCII characters (0 - 9, a - z, A - Z). ● KEY 1 through KEY 4: Enter a valid WEP key value for each key position. ■ For hexadecimal entries, you must enter 10 digits (for 40/64-bit encryption) or 26 digits (for 104/ 128-bit encryption). Hex digits are not case-sensitive. ■ For alphanumeric entries, enter 5 characters (for 40/64-bit encryption) or 13 characters (for 104/128-bit encryption). Alphanumeric entries are casesensitive. C-12 HP Jetdirect EIO Control Panel Menus