HP D2D .HP D2D Backup System user guide (EH985-90907, March 2011) - Page 192
To import from attached tape storage device
View all HP D2D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
4. Click Create. NOTE: You cannot select a cartridge from a Replicating Target Library for export. The Role column in the Devices section tells you what sort of library you have selected. 5. The process warns you that the cartridge data on the HP D2D Backup System will be removed once it has been exported. You must click OK to continue. It also checks that media is loaded in the attached tape storage device and that it is blank. If it is not blank, you are given the option of overwriting it or canceling the job. Finally, it checks that there is cartridge data in the slot to be exported (it may have been subsequently moved by the backup application.) NOTE: In the case of libraries some of these checks can only be made after loading the cartridge in a tape drive, which takes approximately one minute. 6. The Job Status page is displayed and you can view progress in the final column. 7. Once the export completes successfully, the cartridge is removed from the mail slot. NOTE: If you cancel the process, remember to use the backup application (or the Web Management Interface) to move the cartridge back from the mail slot to the cartridge slot. To import from attached tape storage device An import operation may be performed on a physical cartridge in the attached tape drive. The cartridge is copied to the target device on the HP D2D Backup System. The operation will either automatically create a new cartridge in the mail slot of a library device or replace the data on a cartridge in a standalone tape drive device. The mail slot or cartridge must be empty. 1. Locate the mail slot in the Cartridge list and click on the Next button. (There is an Import label in the right column of the mail slot.) 2. This displays the second page of the wizard. (Or reports an error if no tape storage devices are currently attached to the HP D2D Backup System.) 3. Select the attached tape drive from the pull-down list, the required physical slot if it is a tape library, the required verify/compare option and whether the physical cartridge should be unloaded after the operation completes. NOTE: In the case of libraries some of these checks can only be made after loading the cartridge in a tape drive, which takes approximately one minute. 4. Click Create. 192 Extra information for G1 products