HP DL320 HP ProLiant DL320 Generation 2 Server Setup and Installation Guide - Page 29
Installing an Expansion Board - proliant quickspecs
UPC - 829160513218
View all HP DL320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Installing Hardware Options Refer to www.compaq.com/quickspecs for DIMM option kits. CAUTION: Electrostatic discharge can damage electronic components. Be sure you are properly grounded before beginning any installation procedure. Refer to Appendix B, "Electrostatic Discharge," for more information. To install a DIMM onto the system board: 1. Access internal server components. Refer to the "Accessing Internal Server Components" section earlier in this chapter. 2. Open the DIMM socket latches. 3. Align the key slot in the bottom edge of the DIMM with the tab in the expansion socket. IMPORTANT: Misaligned DIMMs do not seat. 4. Press down firmly on the DIMM while pushing the latches inward until the latches snap into place. 5. Reverse the procedures performed in the "Accessing Internal Server Components" section earlier in this chapter. Installing an Expansion Board To install an expansion board, complete the procedures described in the following subsections. 3-8 HP ProLiant DL320 Generation 2 Server Setup and Installation Guide