HP DL320 HP ProLiant DL320 Generation 2 Server Setup and Installation Guide - Page 67
Install Insight Manager to manage the server. For Management CD initialization
UPC - 829160513218
View all HP DL320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Server Installation IMPORTANT: The SmartStart and Support Software CD (recommended) or the RBSU that is embedded in the server ROM can be used to configure certain system features. Step 2 applies only to users who choose to configure their servers with the SmartStart and Support Software CD. IMPORTANT: The optional CD-ROM/diskette or DVD-ROM/diskette drive assemblies must be installed to use SmartStart software. 2. Place the SmartStart and Support Software CD in the CD-ROM/diskette or DVD-ROM/diskette drive and power up the server. Follow the onscreen instructions to complete the server initialization process. For SmartStart and Support Software CD initialization procedures, refer to the Server Setup and Management pack shipped with the server or refer to Chapter 5, "Server Configuration and Utilities." 3. Run the ROM-Based Setup Utility (RBSU) by pressing the F9 key when prompted. Use RBSU to identify the type of operating system and set the date and time. For information on using the RBSU to configure other server features, refer to Chapter 5, "Server Configuration and Utilities." 4. Install the operating system. 5. Install Insight Manager to manage the server. For Management CD initialization procedures, refer to the Server Setup and Management pack shipped with the server. IMPORTANT: Insight Manager must be installed to benefit from Pre-Failure Warranties on processors, hard drives, and memory modules. 6. Install any application software needed. 7. Register the server. Refer to the "Registering the Server" section later in this chapter. 4-16 HP ProLiant DL320 Generation 2 Server Setup and Installation Guide