HP DL320 HP ProLiant DL320 Generation 2 Server Setup and Installation Guide - Page 49
Inserting the SCSI Module stand-offs, Remove the ATA hard drives if necessary.
UPC - 829160513218
View all HP DL320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Installing Hardware Options 3. Remove the center wall. Refer to step 4 in the "Installing ATA Hard Drives" section earlier in this chapter. 4. Remove the ATA cable from the system board and store for later use. Refer to Figure 3-21. 5. Remove the ATA hard drives if necessary. 6. Insert the SCSI module stand-offs. Figure 3-22: Inserting the SCSI Module stand-offs 3-28 HP ProLiant DL320 Generation 2 Server Setup and Installation Guide
Installing Hardware Options
3.
Remove the center wall. Refer to step 4 in the “Installing ATA Hard Drives”
section earlier in this chapter.
4.
Remove the ATA cable from the system board and store for later use. Refer to
Figure 3-21.
5.
Remove the ATA hard drives if necessary.
6.
Insert the SCSI module stand-offs.
Figure 3-22: Inserting the SCSI Module stand-offs
3-28
HP ProLiant DL320 Generation 2 Server Setup and Installation Guide