HP DL320 HP ProLiant DL320 Generation 2 Server Setup and Installation Guide - Page 58
Inserting the Server into the Rack, inside the fixed rack rails.
UPC - 829160513218
View all HP DL320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Server Installation Inserting the Server into the Rack CAUTION: To avoid destabilizing the rack, install multiple servers starting from the bottom of the rack. To insert the server into the rack: 1. Align the rear end of the fixed server rails (1), on the sides of the server, with the front end of the fixed rack rails (2). Figure 4-6: Aligning the rear end of the fixed server rails with the front end of the fixed rack rails WARNING: To avoid personal injury, press the rail release latches and slowly slide the server into the rack. The rail release latches can pinch your fingertips. 2. Insert the server fully into the rack, ensuring that the fixed server rails slide inside the fixed rack rails. CAUTION: Keep the server parallel to the floor when sliding the fixed server rails into the slide rails. Tilting the server can damage the rails. 3. Tighten the thumbscrews on the front panel to secure the server to the rack. HP ProLiant DL320 Generation 2 Server Setup and Installation Guide 4-7