HP EliteDesk 800 65W G2 Maintenance and Service Guide - Page 26
SATA hard drive cables, SATA data cable, SMART ATA drives
View all HP EliteDesk 800 65W G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Serial ATA Hard Drive Characteristics Maximum data cable length Data interface voltage differential Drive voltages Jumpers for configuring drive Data transfer rate 39.37 in (100 cm) 400-700 mV 3.3 V, 5 V, 12 V N/A 6.0 Gb/s SATA hard drive cables SATA data cable Always use an HP approved SATA 6.0 Gb/s cable as it is fully backwards compatible with the SATA 1.5 Gb/s drives. Current HP desktop products ship with SATA 6.0 Gb/s hard drives. SATA data cables are susceptible to damage if overflexed. Never crease a SATA data cable and never bend it tighter than a 30 mm (1.18 in) radius. The SATA data cable is a thin, 7-pin cable designed to transmit data for only a single drive. SMART ATA drives The Self Monitoring Analysis and Recording Technology (SMART) ATA drives for the HP Personal Computers have built-in drive failure prediction that warns the user or network administrator of an impending failure or crash of the hard drive. The SMART drive tracks fault prediction and failure indication parameters such as reallocated sector count, spin retry count, and calibration retry count. If the drive determines that a failure is imminent, it generates a fault alert. 18 Chapter 3 Routine care, SATA drive guidelines, and disassembly preparation